|
Frequently
Asked Questions
"What
is your recommended method to break-in a barrel?"
This is the most frequently asked question from
customers purchasing a new Bullberry barrel. My stock answer is, "With
a premium factory lapped barrel in your hands the break-in has already
been done." This is a true statement, but we also want you to take
care of your new barrel.
I feel strongly that the barrel should apply
one of the new synthetic bore treatment products now available, in order
to prevent any type of fouling. We now furnish a sample of Eezox™
Premium Gun Care with all new barrels in an effort to save you time,
energy, and most importantly, to give you the most
accurate firearm possible.
Use Eezox™ to clean your barrel initially
and after every shooting session. It's easy--- a couple of wet patches
followed by a tight dry patch will usually suffice---no need to overdo
it! A gray residue will show on your final patch. Don't work to remove
this as it will allow for continued lubrication and treatment. Using
Eezox™ will offer the advantages of moly-coated bullets without
the danger of moly buildup. Eezox™ is great for properly cleaned
older barrels too. Even barrels which have been minorly copper-fouled
can be cleaned using very fine steel wool with Eezox™, and will
always be a more successful choice than an ammonia based copper solvent
as Eezox™ will NOT open the microscopic pores in the barrel metal
which allows for worse fouling in the future.
We have Eezox™ available in 4 ounce shop
size squeeze containers. The cost is $7.00 shipped at no additional
charge with an order or sold separately with $1.50 postage. If looking
for a larger container, try our 18 oz. aerosol cans for $26 or a quart
can at $35, plus FedEx charges.
Fred@Bullberry
Got a question? Call us for more
information. We'll be happy to answer any question you may come up with.
|
